Internal tool · Esplugues workshop

Technical mockups ready for production.

Mockup Studio builds the production sheet for a screen-printing order: garment, print areas measured in centimetres and inks with their Pantone. It isn't a design tool: it's the sheet that goes down to the workshop.

Password access · Measurements in cm · Pantone Solid Coated

Garments
11
with their colour chart
Inks
75
with Pantone code
Measures
cm
real, not proportions
Languages
3
castellano, català, english

01 — What it solves

Four things that get written down by hand today and come out on their own here.

  1. 01

    Measurements you can print from

    Print areas in centimetres, distance to the collar and to the bottom edge, and a special 40×50 size. What you see on screen is what goes onto the printing screen.

  2. 02

    Inks with their Pantone

    A chart of 75 inks with their Solid Coated code. The converter searches both ways, and the eyedropper samples a colour from an image to find its match.

  3. 03

    Colour charts by brand

    Garment colours come from each model's catalogue, with the official name used to order from the supplier. The brand travels all the way to the spec sheet.

  4. 04

    Spec sheet as JPG and PDF

    Export the sheet with front and back views, specs per zone, units, size breakdown and each garment's notes, ready to print and take down to the workshop.

02 — From colour to Pantone

Upload an image, tap a colour and it tells you which Pantone it is.

The client's logo, a photo, a screenshot: the eyedropper reads the colour of the spot you tap and the converter finds the closest Pantone Solid Coated in a chart of 3,219 colours. It works the other way round too, from code to colour.

  • Eyedropper on any imageUpload a PNG or a JPG and pick the exact colour of the pixel.
  • The closest PantoneSorted by colour difference (ΔE), with the nearest ones alongside.
  • And in the editor, straight to the inkWith “Add to inks”, the code joins the active print zone.

Pantone Converter

Solid Coated ↔ Hex

Stampa Serigrafia logo with the three spots where the colour was picked

Click the image to pick a colour

  1. 01PANTONE 2397 C#39BABD · ΔE 4.9
  2. 02PANTONE 4008 C#F9B233 · ΔE 3.7
  3. 03PANTONE 302 C#0B3B5B · ΔE 1.4
Colours picked from the Stampa logo; the Pantone comes from the editor's own converter. Approximate on-screen equivalents: production reference is the physical guide.

03 — Why this way

A production sheet, not a pretty picture.

  • The sheet that goes to the workshop

    Not a design tool: it's the production sheet, with the dimensions whoever sets up the screen needs.

  • Ink and Pantone, kept apart

    Garment colour and ink colour are different things, and the sheet treats them that way, each with its own reference.

  • The garment, by its name

    Model, brand and the supplier's official colour, so it gets ordered without mix-ups.

  • With the rules in writing

    Every sheet ends with an annex explaining where distances are measured from and how the design is centred, so nobody has to guess.

04 — Get started

Open the editor and get your first sheet out.

Pick the garment, mark out the zones, add the inks and export the sheet.